Digital T1 Card Info
T1 Cards View Demo
Evolution supports T1 Cards from Rhino, Digium and Sangoma. T1 Cards come in both Software Echo Cancellation and Hardware Echo Cancellation varieties and vary drastically in price accordingly. Depending on your budget we have found that Hardware echo cancellation on T1 cards is not generally needed however it is generally a good idea to buy it if your budget allows for it.
T1 lines offer a digital connection to your telephone service provider. In general T1s are referenced by their signal protocols and have either in-band (often called basic or E&M T1s) or out-of-band signaling (PRI ISDN). T1 lines offer superior voice quality and up to 24 calls per circuit. You must have at least one PCI card in your server to connect T-1 lines to Evolution PBX.
Sangoma A101
The A101 is part of Sangoma's family of Advanced Flexible Telecommunications hardware product line—it uses the same high-performance PCI or PCI Express interface that is providing superior performance in critical systems all over the world.
Services and Features:
- Caller ID and Call Waiting Caller ID
- PCI Half-length Slot
- RJ-48C Connector
- Framing/Coding: ESF/B8ZS, D4/AMI, ESF/AMI, D4/B8ZS
- Signal Types: E&M Wink, E&M Immediate, ISDN PRI, Feature Group D
- Switch Types: AT&T 4ESS, DMS 100, Lucent 5E, National ISDN 2, Network or CPE
Configuration:
- A101 1-port T1 Card
Sangoma A102
The A102 is part of Sangoma's family of Advanced Flexible Telecommunications hardware product line—it uses the same high-performance PCI or PCI Express interface that is providing superior performance in critical systems all over the world.
Services and Features:
- Caller ID and Call Waiting Caller ID
- PCI Half-length Slot
- RJ-48C Connector
- Framing/Coding: ESF/B8ZS, D4/AMI, ESF/AMI, D4/B8ZS
- Signal Types: E&M Wink, E&M Immediate, ISDN PRI, Feature Group D
- Switch Types: AT&T 4ESS, DMS 100, Lucent 5E, National ISDN 2, Network or CPE
Configuration:
- A102 2-port T1 Card
Sangoma A104
The A104 is part of Sangoma's family of Advanced Flexible Telecommunications hardware product line—it uses the same high-performance PCI or PCI Express interface that is providing superior performance in critical systems all over the world.
Services and Features:
- Caller ID and Call Waiting Caller ID
- PCI Half-length Slot
- RJ-48C Connector
- Framing/Coding: ESF/B8ZS, D4/AMI, ESF/AMI, D4/B8ZS
- Signal Types: E&M Wink, E&M Immediate, ISDN PRI, Feature Group D
- Switch Types: AT&T 4ESS, DMS 100, Lucent 5E, National ISDN 2, Network or CPE
Configuration:
- A104 4-port T1 Card
Digium TE120
TheWildcard TE120 is a half-length PCI card that supports industry standard telephony and data protocols for connecting one T1 through Evolution PBX. The card supports both RBS (Robbed Bit Signaling or in-band signaling) and Primary Rate ISDN (PRI) protocol families for voice. The board drives both line-side and trunk-side interfaces, including call features. The TE120 works in both 3V and 5V slots by auto detecting the slot's voltage.
Services and Features:
- Caller ID and Call Waiting Caller ID
- PCI Half-length Slot
- RJ-11C Connector
Configuration:
- TE120 1-port T1 Card
- Digium TE210/205
The Wildcard TE210 is a half-length PCI card that supports industry standard telephony and data protocols for connecting one T1 through Evolution PBX. The card supports both RBS (Robbed Bit Signaling or in-band signaling) and Primary Rate ISDN (PRI) protocol families for voice. The board drives both line-side and trunk-side interfaces, including call features. The TE210 works in both 3V and 5V slots by auto detecting the slot's voltage.
Services and Features:
- Caller ID and Call Waiting Caller ID
- PCI Half-length Slot
- RJ-11C Connector
Configuration:
- TE210 2-port T1 Card
Digium TE405/410
The Wildcard TE405 is a half-length PCI card that supports industry standard telephony and data protocols for connecting four T1s through Evolution PBX. The card supports both RBS (Robbed Bit Signaling or in-band signaling) and Primary Rate ISDN (PRI) protocol families for voice. The board drives both line-side and trunk-side interfaces, including call features. The TE405 works in 5.0V PCI slots.
Services and Features:
- Caller ID and Call Waiting Caller ID
- PCI Half-length Slot
- RJ-48C Connector
- Framing/Coding: ESF/B8ZS, D4/AMI, ESF/AMI, D4/B8ZS
- Signal Types: E&M Wink, E&M Immediate, ISDN PRI, Feature Group D
- Switch Types: AT&T 4ESS, DMS 100, Lucent 5E, National ISDN 2, Network or CPE
Configuration:
- TE405 4-port T1 Card
Resources
| Single Port A101 Datasheet | Datasheet | (793 KB) | |
| Dual Port A102 Datasheet | Datasheet | (802 KB) | |
| Quad Port A104 Datasheet | Datasheet | (928 KB) | |
| Single Port TE121/TE122 Datasheet | Datasheet | (1.9 MB) | |
| Dual Port TE210P/TE220 Datasheet | Datasheet | (1.9 MB) | |
| Quad Port TE410P/TE420 Datasheet | Datasheet | (1.9 MB) |
